甲板坐标系下速率火控射击诸元解算及弹道修正

速率火控系统是在甲板坐标系下解相遇的,它不依赖于导航系统.它与常规火控不同,甲板倾斜的修正不能采用简单的坐标系变换的方式.针对速率火控甲板倾斜修正问题,指出了两种需要进行甲板倾斜修正的情况,推导给出了计算方法,通过原理仿真计算,验证了计算方法的正确性.     

基于SDP松弛的干扰资源优化分配技术研究

提出一种基于semidefinite programming(简称SDP)松弛的干扰资源优化分配算法。在问题优化过程中首先对模型中非凸的约束条件进行松弛,变为凸约束,将原来的数学模型转化成SDP求解形式,利用内点算法对松弛后的模型求解。该算法利用解析的手段使得干扰资源优化分配问题中的NP难问题在多项式时间内得以解决,并且有较高的可靠性。仿真结果验证了算法的有效性。     

电磁轨道炮电感梯度影响因素分析

利用Ansoft Maxwell 14.0有限元分析软件,在考虑和不考虑电枢2种情况下对简单电磁轨道炮电感梯度的影响作对比分析,得出计算电感梯度时有必要将电枢的影响考虑进去的结论.为提高增强型轨道炮的电感梯度,分析不同轨道间距、厚度以及不同炮口宽度对2种增强型轨道炮电感梯度的影响,得出电感梯度随轨道参数变化的规律.     

基于瞬态冲击法的方钢管混凝土柱脱空检测试验

通过对有脱空缺陷的方钢管混凝土柱试件进行瞬态冲击作用下的检测试验,提出了根据振动信号频率变化、频谱峰值和WVD时频分布中频率的时间连续性等特征来进行脱空检测的新方法。基于WVD时频分布特性,提出了使用平均频率作为脱空判别指标。结果表明：当方钢管混凝土柱存在脱空,振动信号的平均频率发生明显降低,频谱图中频率成分简单,归一化频谱峰值高,在WVD时频分布三维图上呈现沿时间轴连续的偏平峰。说明该方法对检测方钢管混凝土柱脱空具有一定的有效性。     

医院供配电系统谐波测量和分析

为治理日趋严重的医院供配电系统谐波污染,需要深入了解医院谐波分布。利用FLUKE 43B对某医院进行现场谐波测试,基于所得数据重点分析了医院供配电系统谐波污染和谐波源分布情况,根据医院谐波污染特点总结了治理方法。结果表明:医院供配电系统存在严重的谐波污染。被测量医院设备先进,种类齐全,测试所得数据具有较强的代表性,可为医院供配电系统谐波研究、谐波治理和滤波设备选择提供基础数据参考。     

Quantification of projection angle in fragment generator warhead

Tactical Ballistic Missile (TBM) class target neutralization by the fragment spray of a Fragment Generator Warhead (FGW) calls for quantification of fragment projection angle scatter to finalize the end game engagement logic. For conventional axi-symmetric warhead, dispersion is assumed to be normal with a standard deviation of 3⁰. However, such information is not available in case of FGW. Hence, a set of experiments are conducted to determine the dispersion of fragments. The experiments are conducted with a specific configuration of FGW in an identical arena to quantify the scatter and then verified its applicability to other configurations having a range of L/D and C/M ratios, and contoured fragmenting discs. From the experimental study, it is concluded that the scatter in projection angle follows normal distribution with a standard deviation of 0.75° at Chi-square significance level of 0.01(χ²_0.99).     

A spatial rank‐based multivariate EWMA control chart

Nonparametric control charts are useful in statistical process control when there is a lack of or limited knowledge about the underlying process distribution, especially when the process measurement is multivariate. This article develops a new multivariate self‐starting methodology for monitoring location parameters. It is based on adapting the multivariate spatial rank to on‐line sequential monitoring. The weighted version of the rank‐based test is used to formulate the charting statistic by incorporating the exponentially weighted moving average control scheme. It is robust to non‐normally distributed data, easy to construct, fast to compute and also very efficient in detecting multivariate process shifts, especially small or moderate shifts which occur when the process distribution is heavy‐tailed or skewed. As it avoids the need for a lengthy data‐gathering step before charting and it does not require knowledge of the underlying distribution, the proposed control chart is particularly useful in start‐up or short‐run situations. A real‐data example from white wine production processes shows that it performs quite well. © 2012 Wiley Periodicals, Inc. Naval Research Logistics 59: 91–110, 2012     

对数正态分布加速因子的Bayes估计

基于对数正态分布形式以及分布对数标准差不变的条件,运用Bayes方法对对数正态分布加速寿命试验条件下的加速因子进行分析。首先基于全寿命试验数据和随机变量函数分布的理论推导出加速因子的先验分布;然后由Bayes公式结合少量的现场截尾试验数据,得出加速因子的Bayes估计模型;最后给出实例进行说明。     

谱分析方法在仿真结果分析中的运用

文中给出了谱估计的分析，并将它直接应用于仿真系统输出量的特性分析。对于仿真的可信性问题，讨论了相容性检验方法，特别是小子样现场试验下，仿真与现场试验之间的一致性问题。     

一种基于多层次网格的高效相关过滤方法

在分布式仿真系统中 ,网上流动的大量冗余数据严重影响了系统的可伸缩性。基于均匀网格的相关过滤法减少了冗余数据 ,但具有匹配不精确 ,格子尺寸单一 ,难以适应所有实体的缺点。提出了一种基于多层次网格的相关过滤方法 ,克服了均匀网格法的上述缺点 ,并继承了均匀网格法处理速度快的特点 ,具有快速灵活的特点